Gledhill Stainless Lite Plus Unvented Indirect Cylinders
Available in 8 sizes ranging from 90 litres to 400 litres, with the largest model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.
The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil's corrugated design gives much faster recovery times than can be achieved with plain tube coils.
All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.(Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)
Choosing the most suitable type of Cylinder is a major decision. After you determine that
Indirect Unvented Cylinders are the appropriate answer then the Gledhill PLUIN150 is undoubtedly worth considering.
