Fully Pre-Wired & Pre-Plumbed for Solid Fuel with Gas/Oil Boiler
The SFUTS pre plumbed pre wired Unvented Thermal Store has been designed to link a number of heat sources including gas or oil boilers, wood burners, and solar thermal or PV as well as electric and other inputs. Everything you see in the picture is included in the price!
It uses the thermal store principle of storing central heating (primary) water, and is fed without coils from boilers and wood burners for example. This ensures buffering and the resultant efficiencies. Hot water is safely delivered at mains pressure through a large integral coil for fast bath filling and power showering without a pump. In summer the solar coil, if utilised, will provide most of your hot water needs. In the winter the wood burner, when lit, will handle most of the heating and hot water duties.
Central heating is taken from the store which acts as a buffer for fast radiator or under floor heat up. The store is kept hot by the energy inputs controlled by thermostats. Because the unit is a sealed system it is fine for under floor systems. The primaries are 28mm and can be teed off for two separate circuits if required.
- Fully integrated & pre-wired
- Simple “plug & play" installation
- Stainless steel cylinder
- New! Boiler and wood burner
- Timers now fitted
- Link gas / oil / solid fuel / solar
- Mains hot water
Choosing the most suitable sort of Cylinder is an important decision. When you determine that Thermal Store Cylinders deliver the correct solution then the Advance Appliances SFUTS Multi Fuel Thermal Store Cylinder 210 Litre - SFUTS 210 is assuredly worth seriously thinking about.
